Standard door sizes in Australia

Internal doors in Australia are usually 2040 mm high and 820 mm wide; front doors are often 820 to 920 mm wide and sometimes 2340 mm high. The opening you can carry furniture through is a few centimetres less.

By the Pncyl team · Updated 17 November 2026 · 3 min read

Standard sizes

Door leaf sizes
DoorHeightCommon widths
Internal hinged2040 mm620, 720, 770, 820, 870 mm
External (front door)2040 or 2340 mm820, 870, 920, 1020 mm
Cavity sliding2040 mm720 to 920 mm
Double (French) doors2040 or 2340 mmTwo leaves of 620 to 820 mm
Wardrobe slidingTo the ceiling or 2040 mmPanels of 600 to 1200 mm
Garage (single)2100 mm2400 to 2700 mm
720 door72.0 × 204.0 cm820 door82.0 × 204.0 cm920 door92.0 × 204.0 cm
Door leaves to scale: 720, 820 and 920 mm wide, all 2040 mm high.

The leaf, the frame and the clear opening

Door sizes are quoted for the leaf, the door itself. The frame (jambs) adds roughly 30 to 40 mm each side to the opening in the wall. But what matters for moving furniture or a wheelchair is the clear opening: the space between the face of the open door and the doorstop opposite. A hinged 820 door usually gives about 770 to 780 mm clear, because the open door still occupies part of the doorway.

82.0 cm door
An 820 mm hinged door: open, it still sits in the doorway, leaving about 77 cm clear.

Which width where

Cavity sliders

A cavity sliding door disappears into the wall, so it needs no swing space: useful in small bathrooms, laundries and walk-in robes. It does need a stretch of wall as wide as the door, with no power points, pipes or switches inside it. They are harder to seal against sound and draughts, so they suit storage and ensuites better than bedrooms next to living areas.

Taller doors

In homes with 2.7 m ceilings, 2340 mm doors make rooms feel taller and more generous; with 2.4 m ceilings, 2040 mm doors leave a sensible gap above the frame. Taller doors cost more and need matching taller windows to look right. If you are building, ask whether your contract includes them or treats them as an upgrade.

Questions

What is the standard internal door size in Australia?

2040 mm high and 820 mm wide, with 720 mm common for bathrooms and storage.

How wide is a front door in Australia?

Usually 820 to 920 mm wide, with 1020 mm for wider entries; 2040 or 2340 mm high.

How much clear opening does an 820 door give?

About 77 to 78 cm when hinged and fully open.