How much space do stairs take?

In a typical Australian two-storey home, about 2.7 to 3.0 m from floor to floor, a straight stair takes roughly 1 m by 4 m, plus about a metre to step on and off at each end. The opening in the upper floor is nearly as long as the stair.

By the Pncyl team · Updated 14 November 2026 · 3 min read

Start with floor to floor

Measure from the finished floor downstairs to the finished floor upstairs: the ceiling height plus the floor structure. With 2.4 m ceilings and a 300 mm floor, that is 2.7 m; with 2.7 m ceilings, about 3.0 m. Divide by a comfortable riser (about 175 to 180 mm) to get the number of risers. There is always one fewer going than risers, because the top step is the upper floor.

A flight may have at most 18 risers; more needs a landing.
Floor to floorRisersRiser heightGoings at 260 mmRun
2.7 m15180 mm143.64 m
2.85 m16178 mm153.90 m
3.0 m17176 mm164.16 m
3.3 m19174 mm18 (needs a landing)4.68 m + landing
riser 18.0 cmgoing 26.0 cm2R + G = 62.0 cm
Fifteen 180 mm risers and fourteen 260 mm goings climb 2.7 m in a 3.64 m run.

Width

For a main stair, plan 900 mm to 1 m between the walls or handrails. Wider makes moving furniture easier; under about 850 mm feels mean. Add the thickness of a stringer and balustrade on an open side.

Space at the top and bottom

The stairwell opening

Above the stair, the upper floor has to be cut away so you don’t hit your head: the Building Code requires at least 2 m of headroom measured above the nosings. In practice, the opening in the upper floor runs from the top step back most of the stair’s length, often 3 m or more for a straight stair. That opening is lost floor upstairs, so the stair’s position shapes both floors.

170.0 cm tallA step, part way up90.0 cmHeadroom needed290.0 cmUnderside of floor300.0 cm
Headroom under the upper floor: 2 m above the nosing line, plus the floor structure.

Footprints by shape

ShapeFootprint, 2.7 m floor to floor
Straight1.0 × 3.7 m + 1 m at each end
L-shapedAbout 2.0 × 3.0 m
U-shapedAbout 2.0 × 2.6 m
Spiral1.6 to 2.0 m diameter

Adding stairs to an existing home

When adding a second storey, the stair often costs more floor than people expect: a straight stair and its landings can take 6 m² on the ground floor and as much again upstairs. Look for a spot where the space under the stair is useful (storage, a powder room) and where it lands in a hallway rather than a room. See adding a second storey.

Questions

How much space does a straight staircase need?

About 1 × 4 m for a typical 2.7 to 3.0 m floor-to-floor height, plus about 1 m at each end.

How many steps for a 2.7 m floor to floor height?

About 15 risers of 180 mm.

How wide should stairs be?

900 mm to 1 m for a main stair in a house.