How to use a photo of a tile or timber in a room design

Photograph a sample flat and square-on, mark one length you know (the tile’s edge, a board’s width), and the photo becomes a material at real size. Then you can see exactly how big the pattern looks across a whole floor or wall.

By the Pncyl team · Updated 17 November 2026 · 3 min read

Why scale matters

The most common surprise with tiles and floors is scale: a pattern that looks lovely on a 30 cm sample can look busy across a 20 m² floor, and a large-format tile can look like a slab. Seeing the material at its real size in your room, under your furniture, shows that before you buy.

Taking a good photo

DoAvoid
Lay the sample flat; shoot straight downAngled shots that stretch the pattern
Even, diffused daylightFlash and glare from a window
Fill the frame with the materialLots of background
Several tiles or boards together, with grout linesA single tiny chip
Note one real size: tile edge, board widthGuessing the size later
6.0 cm on paper0.6 m in real life1:101 cm = 0.1 m
Mark a known length on the photo: a 600 mm tile edge sets the scale of everything else in the picture.

Setting its real size

Draw a line along something in the photo whose length you know: the edge of a 600 mm tile, the width of a 180 mm board, a 300 mm ruler laid beside a fabric. The material is then made at real size, so on a 4 m wall, a 600 mm tile repeats just under seven times, as it will in real life.

What works well

MaterialTips
TilesInclude grout lines and two or three tiles
Timber and hybrid flooringSeveral boards, showing their length and variation
Benchtops and stoneA large sample or a slab photo from the supplier
WallpaperA full pattern repeat
FabricA flat swatch, with a ruler in shot
PaintChoose the colour directly instead

Looking at it properly

1Photograph the sample flat2Mark one known length3Brush it onto a floor or wall4Walk through and compare
From sample to room.

Grout and joints

Grout colour changes a tiled surface more than people expect: dark grout on a white tile draws a grid, matching grout makes the surface read as one. If the sample photo shows grout lines, the material carries them across the room at the right spacing, so you can judge the grid before choosing a grout colour.

Supplier images

Supplier websites often have high-quality, square-on images of tiles and boards with their sizes listed. These work well; use the listed size as your known length. Lifestyle photos of finished rooms don’t work, because the material is seen at an angle.

Questions

Can I see a tile in my room before buying?

Yes: photograph a sample flat, set its real size from one edge, and apply it to your room in 3D.

How do I photograph a tile for a room design?

Flat and square-on, in even daylight, with two or three tiles and the grout showing.

Why does scale matter for tiles and floors?

A pattern looks very different across a whole room than on a small sample.