Split-level homes: are they worth it?

A split-level home steps down a sloping block in half-levels joined by short stairs, instead of cutting the land flat. It can save digging and retaining walls and gives rooms different views, at the cost of more stairs inside.

By the Pncyl team · Updated 20 November 2026 · 3 min read

How a split level works

On a sloping block, a single flat slab means either digging into the hill (cut) or building up the low side (fill), usually both, with retaining walls. A split level puts parts of the home at different heights that follow the land: often living areas on one level and bedrooms half a floor up or down, joined by three to eight steps.

Level differenceSteps (about 175 mm each)
0.5 m3
0.9 m5
1.2 m7
1.4 m (half a storey)8
riser 18.0 cmgoing 27.0 cm2R + G = 63.0 cm
Five steps of 180 mm drop 0.9 m from the bedroom level to the living level.

Pros and cons

ProsCons
Less excavation and fewer retaining wallsStairs inside, harder with prams, walkers or wheelchairs
Follows the land; less of a box on a hillMore complex design and construction
Separates living and sleeping zonesHeating and cooling different levels
Higher ceilings where levels overlapFurniture moving on short stairs
Views from upper half-levelsSome buyers dislike internal stairs

Split level or cut and fill?

On a gentle slope (under about 1 m of fall across the house), a single slab with modest cut and fill is usually cheaper. On steeper blocks, the cost of excavation, removing soil, retaining walls and drainage rises quickly, and a split level or a suspended timber floor on piers starts to make sense. A geotechnical report and an early quote for both options are worth the cost.

Even short stairs follow the rules

Every stair, even three steps, must follow the Building Code’s riser and going rules, with every step the same. A short stair still needs a handrail on at least one side, and if the drop beside it is over 1 m, a balustrade. See stair rules. Single steps in a room are a trip hazard; use at least two risers, or a ramp.

Planning one

  1. Survey the block

    A contour survey shows the fall across where the house sits.

  2. Put living where the sun and view are

    Usually north-facing; often the lower level opens to the garden.

  3. Group rooms by level

    Sleeping together, living together, garage at street level.

  4. Keep the stairs short and central

    So each level is a few steps from the others.

  5. Plan for access

    At least one entry and one bathroom on the main living level.

Living in one

Questions

What is a split-level home?

A home with floors at staggered heights, usually half a storey apart, joined by short stairs, to follow a sloping block.

Is a split level cheaper than cut and fill?

On steeper blocks, often yes; on gentle slopes, usually not.

How many steps between split levels?

Commonly three to eight, depending on the level difference.